I think most of you know well about Paul’s Quality Backlinks service: paulsqualitybacklinks.com (especially WhiteHat). Every month Paul prepares a new base of trust resources for hand submit. However, it is so difficult to register by hand and left “fat” backlinks. Moreover, we’ve got Xrumer and it would be incorrect not to use it. Paul’s base that was issued in September can serve as the example, though we can examine any other base. And I’ll take only a part of the resources – one engine, you can check the same engines occur in each base and only links change. You can pay money for new Paul’s bases every month or you can just examine his trust engines and every month have not 50, 100, 500 or 1000 “fat” links for money but as many as you will be able to take away with you. :)
So, let’s start. The first at present moment “alive” resource from Paul’s base is as follows: azizilife.com/member/register
Let’s examine it more detailed. It is made on the engine «Powered by ExpressionEngine» (before it there were two more links on the same engine but they are not available now). If you look through the Paul’s base issued in September you’ll see that this engine is widely used by him and one can place links with anchors in a profile. I’m not going to tell you about parsing a base by Hrefer now as I described this process in previous article when I provided examples of YaBB forums. If there are any questions, please, do not hesitate to contact me. I’d like to mention that you should load approximately the following signs in template of Hrefer (you can add your own, it’s not difficult):
"ExpressionEngine Discussion Forum - Version"
"ExpressionEngine Discussion Forum - Version 1.3.2"
"ExpressionEngine Discussion Forum - Version 2.2.0"
"ExpressionEngine Discussion Forum - version 3.1.2"
"The most visitors ever was *, on * *, 2009 *" ExpressionEngine
"The most visitors ever was *, on * *, 2010 *" ExpressionEngine
"The most visitors ever was *, on * *, 2011 *" ExpressionEngine
"Script Executed in * seconds" ExpressionEngine
and so on.
In Sieve-filter you should add the following:
/forum/
/viewforum/
/member/
/viewthread/
/forums/
/viewpost/
/commune/
/memberlist/
In some time we’ll have a base of almost all sites on the engine ExpressionEngine. You will be able to economize on Paul’s bases. :)
I parsed small base. Hrefer help me check up pagerank:
And now we’ll make Xrumer 7.07 Elite mod for registration on the engine ExpressionEngine. Initially I don’t have a desire to teach you posting - cast no dirt in the well that gives you water. There are some narrow-minded men who may very quickly kill by their posting “honey hole”. That’s why I’m going to teach you only how to register at the resource and how to modify a profile after registration.
Let’s take Xrumer 7.07 Elite archive and unpack it into a new folder. We may call this folder «Xrumer7.07–ExpressionEngine», in order not to make confusions later.
Then let’s start to create a mod.
At first, I advise you to do a whole procedure by hand to study all the nuances. Take the forum: http://www.gearlive.com/forums/ . You may note on registration page that you can leave a link on it. But without anchor.
Look at the source code of the page, almost everything is standard there and Xrumer will understand instructions. We need to teach Xrumer only this block:
<p><input name="accept_terms" value="y" type="checkbox"> <span class="alert">I agree to the terms of service</span></p>
We should teach him this. It is necessary to add a field «accept_terms» into xas_AI.txt, in order to Xrumer knows that during the registration it is necessary to give value "y" to the field.
It should be done in the following way: open the file xas_AI.txt and add this block: #accept_terms y
And this block <input value="Submit" class="submit" type="submit"> provides information submit. In Xrumer the xmessages.txt and the section PRESSAGREE in it are responsible for this. Add this note into the file:
<input class="submit" value="Update" type="submit">
PRESSAGREE
The rest is standard. Let’s start to test. The link gets into the Part successful with notice Result: using proxy XXX.XXX.XXX.XXX:XXXX; registered (registering only mode is ON);
Look through a folder Debug. In the file POST id2 we can see the reason for our failure to register:
The form you submitted contained the following errors
• You must submit the word that appears in the image
We have Captcha sign - "captcha" in xas.txt, Xrumer doesn’t see captcha itself. We should add the sign into the file default.mask.txt in the folder DeCaptcha.
From this block:
In default.mask.txt add the following sign (after the last note you should miss a line and add this block): [Include] [inLink]captchas[/] [inForm]captcha[/] [/]
Now everything is ok and we see captcha for entering by hand:
The link also gets into halfsuccessful but with a note: Result: using proxy XXX.XXX.XXX.XXX:XXXX; captcha recognized; (manually); registered (registering only mode is ON);
It’s good, we return back to the folder Debug. In the file: POST id2.htm we can see:
Your registration has been successfully completed.
You have just been sent an email containing membership activation instructions.
The registration was a success, it is only necessary to activate via email. A phrase: «You have just been sent an email containing membership activation instructions» should be added into the file xmessages.txt, in order to Xrumer knows that a letter is sent us for activation. Add it into the block ACTIVATION after the last sign in this block:
You have just been sent an email containing membership activation instructions
ACTIVATION
Now open our e-mail and read an activation letter.
We receive a link for activation as follows:
http://www.gearlive.com/?ACT=8&id=VkKMMN5xo4&r=f&board_id=1
Open the file xpop.txt and look for such a sign for activation. You won’t find it there. Add it into хрор.txt: [...]your activation code[...] – into the block [HEADERNEEDS] http://[...]?ACT=[...] - into the block [LINKNEEDS]
Now you can take this link and add it into the field «test». Everything is ok. We’ve done it. We registered and in the site there is our profile but it needs modifications:
Open the folder Debug again. In the file: POST id2.htm we can see:
Your account has been activated
You are now logged in
Add this into the file xmessages.txt in order to Xrumer knows that we activated our account and logged in. We make all the rest by analogue in accordance with the previous changes in this file:
Your account has been activated
REGISTERED
and
You are now logged in.
LOGGEDIN
Now Xrumer can successfully activate links and log in into a forum. Then we should teach him to modify a profile in order to leave there where it is possible a link with anchor.
You should make modifications into the file xurl.txt. To modify a profile you should go to the link: http://www.gearlive.com/forums/member/profile/ and then to the link: http://www.gearlive.com/forums/member/edit_profile/ . URL with anchor (and not one) you may leave in the field Bio.
Add into the file xurl.txt:
AddLinkRule([0,'/member/profile/'
],URL_TO_EDITPROFILE);
AddLinkRule([0,'/member/edit_profile/'
],URL_TO_EDITPROFILE2);
And to see a profile you should add the following:
AddLinkRule([0,'/member/1'],URL_TO_VIEWPROFILE);
AddLinkRule([0,'/member/2'],URL_TO_VIEWPROFILE);
AddLinkRule([0,'/member/3'],URL_TO_VIEWPROFILE);
AddLinkRule([0,'/member/4'],URL_TO_VIEWPROFILE);
AddLinkRule([0,'/member/5'],URL_TO_VIEWPROFILE);
AddLinkRule([0,'/member/6'],URL_TO_VIEWPROFILE);
AddLinkRule([0,'/member/7'],URL_TO_VIEWPROFILE);
AddLinkRule([0,'/member/8'],URL_TO_VIEWPROFILE);
AddLinkRule([0,'/member/9'],URL_TO_VIEWPROFILE);
AddLinkRule([0,'/member/0'],URL_TO_VIEWPROFILE);
Excellent! We need to identify what field in our PROJECT will be responsible for Bio. I’ve chosen Real name. In the field Real name we should enter HTML code: <a href="http://GenieGenieGenie.info">ExpressionGenie</a>
And you should add sign Bio into xas_AI.txt:
#bio
REALNAME
Let’s try. And yet you should add signs for log in into xurl:
AddLinkRule([0,'/action,login'
],URL_TOLOGIN);
AddLinkRule([0,'/member/login'
],URL_TOLOGIN);
Everything works.
These are the full list of changes you should make in the files: Add into xmessages.txt: Your account has been activated REGISTERED You have just been sent an email containing membership activation instructions ACTIVATION <input class="submit" value="Update" type="submit"> PRESSAGREE You are now logged in. LOGGEDIN
Add into xignoreforms.txt: [PM_EPROFILE] {IN_FORM}<input class="submit" value="Search" type="submit"
Add into xas_AI.txt: #bday_d [DAY_TOMORROW] #bday_m [MONTH_TOMORROW] #bday_y RANDOM[1981..1991] #bio REALNAME #accept_terms y
Add into default.mask.txt: [Include] [inLink]captchas[/] [inForm]captcha[/] [/]
However, I’d like to warn that it is desirable to do mods for yourself or for limited number of users because “fat” engines in condition of mass use either stop being “fat” or just impose such a protection that MOD cannot surpass and it should be updated. I’m 100% sure that after this information is published mod, in some time, will stop functioning well. Hurry up to skim the cream. Here the situation is the same as with Xrumer’s ups. You should outdistance your competitors and as I mentioned it in my previous lesson – time is money.
Profiles on this engine are long ago used not only in black but in white SEO. Paul may confirm it. :)
Quaerite et invenietis.
«Make a request, and it will be answered; what you are searching for you will get; give the sign, and the door will be open to you.» (Matthew 7:7)
The complex Xrumer+Hrefer – strongest armament and you should only learn to use it in a proper way and Xrumer will bring you 6-figures annually.
Video1:
Video2:
